Blueberry Markets TradingView Integration 2026

Broker Audit, 2026

By Ken Chigbo, Founder, KenMacro, 18+ years across discretionary and systematic strategies, UK macro desk.

Updated 2026-05-23

The quick verdict

Blueberry Markets has supported TradingView since April 2025. You link your Blueberry account inside TradingView and place orders directly from the chart. The Direct account gives raw spreads from 0.0 pips plus a $7 round-turn commission; Standard starts at 1.0 pip all-in. Minimum deposit is $100 on both. Australian clients fall under ASIC AFSL 535887; international clients onboard via an offshore entity. Expert Advisors still require MT4 or MT5.

Blueberry Markets TradingView integration 2026, KenMacro
Feature On Blueberry via TradingView What it means
Connection Link Blueberry as your broker inside TradingView Authenticate once and your Blueberry account appears as the active broker in the TradingView interface
Pricing (Direct account) Raw spreads from 0.0 pips plus $7 round-turn commission Cost is transparent: the spread is near-interbank and commission is the fixed charge per standard lot traded
Pricing (Standard account) All-in spread from 1.0 pip EUR/USD, $0 commission Commission is baked into the spread; simpler cost structure for traders who prefer a single number
Charting Full TradingView indicator library, alerts, multi-timeframe analysis You keep every tool you already use; no separate charting platform required
Order placement Place, modify and close orders directly from the chart Orders flow through to the Blueberry back-end; no need to switch to a separate platform window
Leverage 30:1 ASIC (AU clients) or up to 500:1 offshore (international clients) Leverage tier depends on which entity issues your account; ASIC rules cap retail majors at 30:1

Trading from the chart you already use

Most charting traders have spent years building their TradingView workspace: saved layouts, custom indicators, multi-timeframe tabs, price alerts. Switching to a broker’s native platform to execute means leaving all of that behind for each trade. Blueberry Markets removes that friction. Since April 2025 you can link your Blueberry account directly inside TradingView, so your analysis and your execution happen in the same window. The desk views this as a practical shift rather than a cosmetic one. A trader who already lives on TradingView has less overhead and fewer platform switches per session.

Open an account

Blueberry Markets

Trade directly from your TradingView charts through a Blueberry Markets account. Choose the Direct account for raw spreads from 0.0 pips plus a $7 round-turn commission, or Standard for spreads from 1.0 pip all-in. Both accounts start at a $100 minimum. Australian clients are covered by ASIC AFSL 535887; international clients onboard via an offshore entity. Open via the genuine Blueberry domain and complete KYC before funding.

Open a Blueberry account for TradingView →read the full review

How the Blueberry TradingView integration works

The connection uses TradingView’s broker integration layer. Open the broker panel inside TradingView, search for Blueberry Markets, and authenticate with your Blueberry account credentials. Once connected, a live order ticket appears at the bottom of your chart. You can place market orders, set limits, and manage open positions without opening MT4, MT5 or any other platform. The integration covers the full Blueberry instrument list: forex pairs, metals, indices, commodities and shares CFDs. Positions and account balance show in real time alongside your chart data. No separate platform window is required during a session.

What it costs on Blueberry

Two accounts are available. The Direct account carries raw spreads from 0.0 pips on EUR/USD and a $7 round-turn commission per standard lot ($3.50 per side). The Standard account rolls the cost into the spread, which starts from 1.0 pip all-in on EUR/USD with no separate commission line. Both accounts require a $100 minimum deposit. For active traders watching spread carefully, Direct is typically cheaper at higher volume; Standard suits those who prefer a single all-in cost. Neither account requires a minimum trade size above the standard lot fraction most brokers offer.

What you get, and the limits

Through the TradingView integration you have access to the full charting suite: hundreds of built-in indicators, custom Pine Script studies, price alerts, and multi-timeframe views. Order management from the chart is functional for manual traders. The key limit is automation: Expert Advisors and other MT4/MT5 algorithmic strategies do not run inside TradingView. If your process involves EAs, you still need MT4 or MT5 alongside the TradingView setup. Similarly, Depth of Market order book data is available on Blueberry’s cTrader platform rather than the TradingView integration. For manual chart traders those gaps are unlikely to matter; for algo traders they are a practical constraint.

How to connect, and the entity note

The setup sequence is straightforward. Open a Blueberry account at the official domain, complete KYC, fund with the $100 minimum, then open TradingView and locate Blueberry Markets in the broker panel. Authenticate with your account credentials and the connection is live. The entity that issues your account depends on your country of residence. Australian clients are onboarded under Blueberry Australia Pty Ltd, licensed by ASIC under AFSL 535887, with leverage capped at 30:1 on retail FX majors. International clients onboard via an offshore entity (Mauritius FSC or Vanuatu VFSC), which carries leverage up to 500:1 but without Tier-1 regulatory coverage. Verify which entity applies to you during registration.

Two brokers the desk routes traders to

Blueberry Markets

ASIC regulated, AFSL 535887, tight raw spreads, award-winning support, copy trading via Myfxbook AutoTrade and DupliTrade.

Open Blueberry Markets account →

VT Markets

Leverage up to 1:1000, 50 dollar entry, copy trading from about 10 dollars, MT4, MT5 and TradingView-grade charting. Offshore Mauritius FSC.

Open VT Markets account →

Frequently asked

Does Blueberry Markets work with TradingView?

Yes. Blueberry Markets added TradingView broker integration in April 2025. You link your Blueberry account inside TradingView’s broker panel, authenticate with your login credentials, and place and manage orders directly from the chart. The connection is persistent across sessions. The integration covers forex, metals, indices, commodities and shares CFDs available on Blueberry. Expert Advisors do not run via TradingView and still require MT4 or MT5.

Can I trade directly from TradingView on Blueberry?

Yes. Once your Blueberry account is connected inside TradingView, an order ticket sits at the bottom of your chart. You can place market orders, set limit orders and manage open positions without switching to a separate platform. All execution flows through to the Blueberry back-end in real time.

How much does it cost to trade TradingView through Blueberry?

On the Direct account: raw spreads from 0.0 pips on EUR/USD plus a $7 round-turn commission per standard lot ($3.50 per side). On the Standard account: spreads from 1.0 pip all-in on EUR/USD with no separate commission. Both require a $100 minimum deposit. The Direct account is generally cheaper for higher-volume traders; Standard suits those who prefer a single all-in spread number.

Can I use Expert Advisors with Blueberry TradingView?

No. Expert Advisors are automated strategies that run inside MT4 or MT5 only. The TradingView integration does not support EA execution. If algorithmic trading via EAs is part of your process, you need to use Blueberry’s MT4 or MT5 platform for those strategies. TradingView on Blueberry is designed for manual chart-based execution.

What can I trade on Blueberry through TradingView?

Blueberry’s TradingView integration covers forex pairs, metals (including gold and silver), global indices, commodities and shares CFDs. The full instrument list mirrors what Blueberry offers on its other platforms. Leverage depends on your account entity: ASIC clients are capped at 30:1 on retail FX majors; offshore clients can access up to 500:1.

Open an account

Blueberry Markets

Trade directly from your TradingView charts through a Blueberry Markets account. Choose the Direct account for raw spreads from 0.0 pips plus a $7 round-turn commission, or Standard for spreads from 1.0 pip all-in. Both accounts start at a $100 minimum. Australian clients are covered by ASIC AFSL 535887; international clients onboard via an offshore entity. Open via the genuine Blueberry domain and complete KYC before funding.

Open a Blueberry account for TradingView →read the full review

Work with the desk

If you want the framework behind the desk’s broker calls, not just the verdict, Ken runs a small one-to-one macro mentorship. Limited places, by application.

See the mentorship →

KenMacro has commercial partnerships with one or more of the brokers referenced and may earn a commission if you open an account. Scores and rankings are editorial and independent of commission. Educational analysis only, not financial advice. Trading leveraged products carries a high risk of loss. Verify regulation by entity and current terms on the broker’s own site before funding any account.

From the desk, free

Get the macro framework the desk actually trades

The same regime-first framework behind every call on this site, plus the weekly macro brief. Free. No spam, unsubscribe anytime.

Leave a Reply

Your email address will not be published. Required fields are marked *